No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ - How to Query Reset Information About Boards on NE40E, NE80E, and NE5000E

Publication Date:  2013-09-25 Views:  53 Downloads:  0
Issue Description
How to query reset information about boards on NE40E, NE80E, and NE5000E?
Handling Process
None
Root Cause
None
Solution

1. To query reset information about boards on NE40E, NE80E, and NE5000E running V300R003 or earlier, run the following commands in hidden mode:

[Quidway]_h

[Quidway-hidecmd]display lpureset 2//The number 2 indicates the line board in slot 2.

LPU2reset information:
-- 1. DATE:2007-04-24  TIME:16:57:02  RESET Num:3
--    Reason: Look for better working parameter of FAP DDR  and reset lpu!
-- 2. DATE:2007-04-24  TIME:16:20:45  RESET Num:2
--    Reason: LPU report dune initialize error,and reset lpu!

2. To query reset information about boards on NE40E, NE80E, and NE5000E running V600R003C00SPC900 or earlier, run the following commands in hidden mode:

[Quidway]_h
[Quidway-hidecmd]display board-reset 2

3. To query reset information about boards on NE40E, NE80E, and NE5000E running V600R003C00SPCA00 or later, run the following commands in diagnosis mode:

[Quidway]diag
[Quidway-diagnose]display board-reset 2
Suggestions
Note that command views and commands are different in different versions.

END