No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
MENU

MPLS LSPs Failed to Be Created Because of Specifications Limitation

Publication Date:  2013-09-30 Views:  9 Downloads:  0
Issue Description

After an NE40 on the live network was reset, MPLS LSPs failed to be created for some connected devices, resulting in service interruption.

The log information on the NE40 was as follows:

#May 18 19:18:55 2012 CC-R-3 TNLM/4/TRAP:
Error: Number of Tunnel ID exceeds the available value. Allocation space: Global 1. Please update the corresponding PAF value.
Handling Process

Huawei performed the following operations to address the problem:

1. Checked the token specifications for establishing MPLS LSPs for 32-bit addresses.
The token resources allowed establishment of a maximum of 1000 LSPs.

<CC-R-3>display tunnel-info statistics                                         
Tunnel Allocation Method :              MIXED-2GLOBAL                          
Seperation point b/w Global and PerSlot 2000                                   
Seperation point b/w Global Space       1000 //This global space indicated the token resources for establishing MPLS LSPs for 32-bit addresses                           
Max Tunnel ID Value Per Board  10000                                  
Total Tunnel ID Allocated   1099                                   
LSP      1099 

2. Ran display mpls lsp to query the number LSPs on the current NE40E.

The NE40E had more than 1000 LSPs.
Root Cause
The token resources were insufficient.
Solution
Upgrade the NE40 to V3R5 in which the specifications of MPLS LSP tokens are 16000.
Suggestions
None

END