No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

High MACL and PES Consumption in the Board CPU of ME60 Due to Layer 2 Loop

Publication Date:  2013-09-30 Views:  45 Downloads:  0
Issue Description
The ME60 (V600R002) in a site presents high board CPU consumption in slot 1. However, only dozens of users are online.
The consumption of module MACL and PES is high after the board CPU task is checked.
<ME60>dis cpu-usage slot 1
CPU Usage Stat. Cycle: 60 (Second)
CPU Usage            : 84% Max: 96%
CPU Usage Stat. Time : 2013-03-19  16:06:13
CPU utilization for five seconds: 84%: one minute: 85%: five minutes: 83%.
 
TaskName        CPU  Runtime(CPU Tick High/Tick Low)  Task Explanation
                         
PES             20%         0/1f0087fd       PES                          
......                         
SRM              6%         0/ 97ebba3       SRM                          
MACL            22%         0/211665e6       MACL                          
......                       
Handling Process
1. The MACL module is in charge of MAC address learning. The high consumption of this module may be caused by a loop. The PES module is in charge of packet processing and is occupied when the MAC address learning message is uploaded.
2. The device is found to carry the VPLS service and a large number of MAC address is flapping between interfaces after running the command display mac-address dynamic 1. Therefore, the problem occurs in Layer 2.
Root Cause
A Layer 2 loop causes high CUP consumption.
Solution
Remove the Layer 2 loop.
Suggestions
None

END