No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

The BFD Does Not Take Effect Due to the Nonstandard Configuration

Publication Date:  2013-09-30 Views:  12 Downloads:  0
Issue Description

Networking: NE40E----transmission link-----NE40E

To address the problem that the transmission device isolating the physical port status, the customer configures the BFD. However, the BFD does not take effect.
Handling Process
Check the BFD configuration and it is found that the commit and port association are not configured. Therefore, the BFD cannot take effect and cannot make the port to be Down.
Root Cause
The BFD is not configured according to the standard.
Solution
Cofigure the BFD according to the standard.
Suggestions
Each time you modified the BFD configuration, you must run the commit command after the modification.

END