No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ How does it work when configure complex traffic classification-based car and port QOS car simultaneously on interfaces

Publication Date:  2014-11-04 Views:  41 Downloads:  0
Issue Description

Q :

How does it work when configure complex traffic classification-based car and port QOS car simultaneously on interfaces

Types of equipment: NE80E&NE40E&NE5000E

Handling Process
No
Root Cause
No
Solution

A :

Types of equipment: NE80E & NE40E NE5000E

Example:

#

traffic behavior test

car cir 3000 cbs 561000 green pass red discard

#

traffic policy test

undo share-mode

classifier test behavior test

#

interface GigabitEthernet 1/ 0/5

 undo shutdown

 traffic-policy test inbound

 qos car cir 2000 cbs 374000 green pass red discard inbound

#

return

 

From the simple configuration example above, we can find it configures complex traffic classification-based speed limitation and interface-class QOS car on the same interface. for the traffic on this interface, the one which matched complex traffic classification will do the speed limitation base on the traffic policy, and it won't be affected by the port QOS car again. The others which don't match the traffic classifier will do the speed limitation base on port QOS car. All the LPUs except LPUF-50/51/120/240 follow this procedure.

LPUF-50/51/120/240's process is different. For these boards, if traffic match the traffic policy(the action of traffic behavior is speed limitation), it will do the speed limitation base on the complex traffic classification first, and then it will limit the speed base on port QOS car again.

Suggestions
No

END