No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

NE40E-X8 login failed due to not setting local user-type to netmanager

Publication Date:  2014-11-06 Views:  54 Downloads:  0
Issue Description


Login equipment through SSH failed and prompt following message:

Handling Process

Login equipment via console port to check the configuration:


user-interface vty 0 4
acl 2000 inbound

authentication-mode aaa

user privilege level 15

idle-timeout 150 0
protocol inbound all

user-interface vty 16 20

acl 2000 inbound

authentication-mode aaa

idle-timeout 150 0

protocol inbound ssh

local-user wanglang password irreversible-cipher $1a$vK~^G=Tg62$A~}!+n.7]+K5/:+"ee<&R*0JP-0j<#K-s:+n~EmB$

local-user wanglang service-type telnet ssh

local-user wanglang level 15

local-user wanglang state block fail-times 3 interval




Check failure:


[Huawei]dispaly aaa online-fail-record
-------------------------------------------------------------------

User name : wanglang

Domain name : default_admin

User MAC : -

User access type : telnet

User IP address : -

User ID : 278732

User authen state : Authened

User acct state : AcctIdle

User author state : AuthorIdle

User login time : 2014-08-07 17:29:28

Online fail reason : Net manager user does not exist

-------------------------------------------------------------------

After adding following configurations, user login successfully.


local-user wanglang user-type netmanager

Check user information:


< Huawei >display users

User-Intf Delay Type Network Address AuthenStatus AuthorcmdFlag

+ 50 VTY 16 00:00:00 SSH 192.168.13.226 pass no Username : wangling

Root Cause
vty16-20 is reserved for network management users by default. If the local authentication user login through vty16-20 ,must set the user type to netmanager.
Solution

Configuration command:local-user wanglang user-type netmanager

(Set user type to netmanager)

Suggestions

If user logins to the VTY16-20 and use the local user authentication, you must set the user type to netmanager .

END