No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our Private policy>


To have a better experience, please upgrade your IE browser.


How to redirect the traffic from source address at MA5200G

Publication Date:  2012-07-27 Views:  163 Downloads:  0
Issue Description
If MA5200G has two or more uplinks, the users with different realizations for network segment could select the next hop address or some egress freely.

Alarm Information

Handling Process
 The configuration steps are as follows:

1. Configure the source user network segment need to redirect, and 3 is the group number of user’s UCL-GROUP

rule-map 1 rule-map 1 user-group 3 any 

2. Configure the next hop address for data stream of source users, and make sure from which egress of MA5200G it should be sent out

   flow-action 1 redirect ip GigabitEthernet1/0/0

3. Create eacl named 123. The first 1 is the name of rule-map, and the second is that of flow-action

   eacl 123 1 1

4. Refer eacl to global mode

[MA5200G_A]access-group eacl 123 


Root Cause
EACL functionality of MA5200G could help finish the task.