Q: If NMS needs to manage the switches through MA5200 by using HGMPV2, how to configure NMS and MA5200?
1. The cluster management at MA5200 must be configured correctly so that switches could join the cluster normally.
2. The VLAN 0 and 1 of the port for MA5200 to connect with a switch must be set to "reserved for system", or the switch may flap after a while.
3. MA5200 must be configured with loopback address.
4. The topology of switch could be displayed by adding MA5200 to NMS, but the address used for adding equipment must be the loopback addres, not the interface address of MA5200, or only the MA5200 could be managed, not the swtich.