What attributes of RADIUS packets will be changed once MA5200G enables PPPOE+services?
If MA5200G enables PPPOE+ services, configure the BAS interface with client-option82 command; when services are enabled, only No. 87 attribute of RADIUS packets, viz. NAS-PORT-ID is changed, and other attributes including No. 5 NAS-PORT will keep consistent. At the point, NAS-PORT-ID will not report the interface information of MA5200G itself, but it reports the location of DSALM. The format is as follows:
"DslamHostName atm frame/slot/subslot/port:vpi.vci"
There is not QINQ application:
"DslamHostName eth frame/slot/subslot/port:vlanid"
There is QINQ application:
"DslamHostName eth frame/slot/subslot/port:qinqvlan.vlanid"
Note: The information above is default configuration. If the system is configured with the following command:
NAS-PORT-ID will use the standard format of a carrier, and the contents include the access information of MA5200G besides the L2 access information of DSLAM.