No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
MENU

FAQ-Two Methods of MA5200F/G to Enable OSPF to Flood Address Pool Segment

Publication Date:  2012-07-27 Views:  167 Downloads:  0
Issue Description
Q: If MA5200F/G need to use OSPF to flood address pool segment, how to realize it? 
      
Alarm Information
Null
      
Handling Process
1. Import direct route to OSPF (take the commands for MA5200F as example, which that for MA5200G is similar to). 
Command: 
[MA5200F-ospf]import-routedirect
2. Configure the address segment of address pool to loopback interface, and then use networkcommand to flood it. 
For example, it needs to flood the address pool segment 192.168.0.0255.255.255.0, and its gateway is 192.168.0.1. 
Command: 
[MA5200F-LoopBack1]ipaddress192.168.0.1255.255.255.0
[MA5200F-ospf-area-0.0.0.0]network192.168.0.10.0.0.255  
Root Cause
Null
      
Suggestions
Generally, only the first is needed, which imports direct route into OSPF. When some address pools configured for MA5200 need to import OSPF, and some not, the second is available. 

END