Why cannot the displayradius-serverconfiguration command executed at MA5200G display the RADIUS source interface information?
If the radius-serversourceinterface command is not configured, which address does MA5200G use to transmit radius packets?
It is required to configure radius-serversourcecommand first. Execute displayradius-serverconfiguration command, and the source interface transmitting radius packets is visible.
If the radius-serversource is not configured, the radius packets carry the IP address of upstream interface.
If there are multiple interfaces, check which interface the radius packets use, and the IP address of the interface used will serve as the source address. At this point, the packets to radius server may carry different IP addresses.