An Alarm on the RAID Group Initialization End Is Reported Due to Misoperations

Publication Date:  2012-07-17 Views:  187 Downloads:  0
Issue Description
Related information about the product and version: CSS V100R001C01 Database Volume.
On the ISM interface , the 0xB0216000E A RAID group initialization ends alarm is reported. Log in on the maintenance terminal to the alarm device as the root user and run the MegaCli64  -ldinit -showprog -lx-aall command, and you can see the initialization status of the RAID group, as shown in the red circle in Figure 1-10. x indicates the sequence number of the RAID group.
Figure 1-1  Viewing the initialization status of the RAID group
Alarm Information
None
Handling Process
Step 1     Log in on the maintenance terminal to the alarm device as the root user.

                               Step 2     Run the MegaCli64  -LDInit -Start -Full -lx-aall command to restart the initialization of the RAID group. Full indicates that the initialization process is in the foreground, x specifies the virtual drive number for the command.

                               Step 3     Check whether the 0xB0216000E A RAID group initialization ends alarm disappears from the ISM interface.

l   If yes, the fault is removed.

l   If no, contact technical support engineers.

----End

Root Cause
On the ISM interface, the alarm listed in Table 1-6 is reported.
Table 1-1  Alarm on RAID group initialization abort
Alarm ID Alarm Name Alarm Cause Alarm Description
0xB0216000E A RAID group initialization ends. The initialization of the RAID group ends. The RAID group of the device ([dev-name]) initialization ends; location: cloud storage domain ([domain-name]), rack ID ([rack]), frame ID ([frame]).
The abort of RAID group initialization is usually caused by misoperations.
Suggestions
None

END