The Prompt "Visit Limit, Your IP Address Is Not Security" Is Displayed

Publication Date:  2012-07-18 Views:  121 Downloads:  0
Issue Description
When a user accesses the virtual gateway, the prompt visit limit, your IP address is not security is displayed.
Alarm Information
None
Handling Process
  1. Log in to the Web-based NMS, and then click  in the Virtual Gateway List navigation tree to unfold the navigation node. Click Policy Configuration and the Policy Default Action tab. The configuration page is displayed.
  2. Check the default policy action.
    • If the default policy action is Permit, it indicates that there is a policy that denies the access from the source IP address of the user in the source IP policy of the virtual gateway. Click Virtual Gateway Source IP Policy and the corresponding  of the policy to delete the policy.
    • If the default policy action is Deny, click Virtual Gateway Source IP Policy to view the source IP policy that is related to the user.
      • If there is a policy that denies the access from the source IP address of the user, click the corresponding  of the policy to delete the policy.
      • If there is no policy that denies the access from the source IP address of the user, you need to add a policy that permits the access from the source IP address of the user. Click Add, and add a policy that permits the access from the source IP address of the user on the Add Virtual Gateway Source IP Policy page.
Root Cause
The policy that denies the access from the source IP address of the terminal is configured by the administrator.
Suggestions
None

END