USG2200TSM配置X86系统ip地址时提示“ board is not registered”

发布时间:  2012-07-18 浏览次数:  129 下载次数:  0
问题描述
用户在命令行下配置USG2200TSM X86系统ip地址时提示:

Error: The ESP board is not registered

使用 display esp status slot 5 提示同样的错误

告警信息
处理过程

1.检查X86卡状态正常

[USG2210]display device

Secospace USG2220TSM's Device status:

Slot # Type Online Status
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0 RPU Present Normal
3 1CE1 Present Normal
5 ESP Present Normal
7 FAN Present Normal
8 FAN Present Normal
9 FAN Present Normal

2. 检查接口配置

dis ip int b
[USG2210]display ip int b
11:59:02 2011/09/25
*down: administratively down
(l): loopback
(s): spoofing
Interface IP Address Physical Protocol Description
Cellular0/1/0 unassigned down up(s) Huawei Symantec
Dialer0 unassigned up up(s) Huawei Symantec
Eth-Trunk1 unassigned down down Huawei Symantec
GigabitEthernet0/0/0 unassigned down down Huawei Symantec
GigabitEthernet5/0/0 unassigned up down ******LINK-TSM-

 

发现USG2200TSM的虚拟接口GigabitEthernet 5/0/0没有配置地址,它是作为作为X86接口卡的网关,没有配置地址的话X86接口卡不能与外部网络互相通信。

 

3. 将5/0/0接口配置上地址
[USG2210]interface GigabitEthernet 5/0/0
[USG2210-GigabitEthernet5/0/0]ip add 192.168.28.1 24

4.再次配置X86系统ip地址成功

查看esp状态也正常

[USG2210]display esp status slot 5
12:07:47 2011/09/25
OS: Microsoft Windows XP[Version 5.1.2600]
OS uptime is 1 weeks, 5 days, 1 hours, 3 minutes
Time Zone: China Standard Time
Local Time: 2011-09-25 12:07:47
CPU Usage: 3 %
Memory Usage: 63 %
Inside Port: Link UP;IP:192.168.28.2;MASK:255.255.255.0;GATEWAY:192.168.28.1
Outside Port 0: Link DOWN;IP:0.0.0.0;MASK:0.0.0.0;GATEWAY:NONE
Outside Port 1: Link DOWN;IP:0.0.0.0;MASK:0.0.0.0;GATEWAY:NONE
X86 Server Status: Running, CF Card Status: Normal, Product Version: V100R001C00SPC100, Software Version: V100R002C01SPC100, License: 500, Copyright: UNKNOWN
Sync time is enabled.
Sync time interval is 1 minutes.

根因
X86板卡有问题
建议与总结
无                                 

END