How to troubleshoot the failure to bind iSCSI ports of the OceanStor S2600?

Publication Date:  2012-07-22 Views:  255 Downloads:  0
Issue Description
During the initial configuration of an S2600 on a deployment site, Huawei engineers tried to bind iSCSI ports on the CLI, but an error occurred. The S2600 is configured with a single controller. The command is as follows:
chgiscsiip -c A -p 0 -a 172.23.20.151 -s 255.255.255.0 -m 1
The error information is displayed as follows:
Error chgiscsiip: The command format is wrong.
Usage: chgiscsiip -c controller ID [-p Port ID] -a IP address -s subnet mask -m config mode
Try  'clihelp -h chgiscsiip'  for more information
Alarm Information
None
Handling Process
The correct command is as follows:
OceanStor: test1> chgiscsiip -c A  -a 172.23.20.151 -s 255.255.255.0 -m 1
This operation will lead to interrupt the service!
Do you want to continue? y or n:y
Root Cause
The entered command parameters for binding iSCSI ports are incorrect. The parameter –m 1 indicates to bind iSCSI ports, and the parameter –p is not required. The parameter –m 3 indicates to unbind iSCSI ports, and the parameter –p is required.
Suggestions
Use the correct parameters when binding ports. Furthermore, ports on the combo interface cannot be bound.  

END