Step 1 Choose Fault > Settings > Mask Rule from the main menu.
Step 2 Select an enabled alarm masking rule, right-click, and choose Property from the shortcut menu.
Step 3 On the Basic Setting tab page, check the settings of the alarm masking rule.
1. If Alarm name is selected, check that the NE offline alarm is not selected. If Alarm name is not selected, go to the next step.
2. In the Severity and Type areas, check that the severity and type of NE offline alarms are not selected. If the severity or type has been selected, clear the relevant check box.
Step 4 Click OK.