Secospace TSM and dualSACG linkage unsuccessful

Publication Date:  2012-09-11 Views:  131 Downloads:  0
Issue Description
TSM server
                                                |
                                             SW
                             ________ | _________
                             |                                         |
                     SACG-1                            SACG-2

1.Dual SACG is used to do a backup, SACG -1 and SACG-1-2 upstream is the vrrp and the hrp. TSM server and it in the same network segment
2. TSM SACG configuration, the main SACG IP is the vrrp virtual address
3.TSM and SACG linkage unsuccessful.
Alarm Information
None
Handling Process
TSM server to get rid of the SACG IP into the main is SACG-1 IP,the backup is SACG-2 IP
Root Cause
SACG active linkage with TSM server through the physical interface to negotiate, not to negotiate through vrrp virtual address
Suggestions
The TSM server and SACG linkage unsuccessful general have bellow circumstances
1.key errors
2.IP address configuration errors (TSM direction interface IP)
3.TSM negotiation ports are not open

END