FAQ-What are the limits for the MA5200G users when they visit each other?

Publication Date:  2012-09-20 Views:  189 Downloads:  0
Issue Description
What are the limits for the MA5200G users when they visit each other? 
Alarm Information
none
Handling Process
The version VRP3.30-23xx of MA5200G supports MPLS VPN (VPLS) of layer 2.  For purpose of the visit bidirectional between the user VPLS, this version realizes it as follows:
1.For the users under one same MA5200G
The user under the different VPN instances can’t communicate with each other(no matter the VLAN is same or not; of course, is the VLAN is same, it can communicate with the switches directly without the control of MA5200G )
2.For the users under different MA5200G
The user under the different VPN instances can’t communicate with each other.
The user under same VPN instances
A.When the encapsulation is ETHERNET, the user can communicate with each other (except the communication is controlled by the MAC access control list in ACL )
B.When the encapsulation is VLAN, the user under the same VLAN can communicate with each other(except the communication is controlled by the MAC access control list in ACL ), the user under different VLAN can’t communicate with each other

[Quidway-vsi-vsi1]mpls-vc 1.1.1.1 100 encapsulation ?                          
  Ethernet Set vc encapsulation type                                          
  vlan      VPLS Ethernet VLAN encapsulation
Root Cause
none
Suggestions
none

END