No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Why do not the static route work with adding a correct next hop address on USG2100 firewall?

Publication Date:  2012-09-17 Views:  251 Downloads:  0
Issue Description
Router configuration is that:
[USG2100]ip route-static 192.168.2.0 24 Ethernet 1/0/0 172.16.0.2
[USG2100]ip route-static 192.168.3.0 24 Ethernet 1/0/0 172.16.0.2
Layer 3 switch has default router to the firewall gateway, and PC has his gateway. The PC between two network segment fail to ping on firewall, and the PC fails to ping firewall.
Alarm Information
none
Handling Process
We find that the customer’s internal network is the vlanif interface. But the router adds the layer 2 physical interface. You can solve the problem by deleting the outbound interface of the router or change the layer 2 interface to layer 3 interface on vlanif .
Root Cause
none
Suggestions
none

END