NIP1000 device, engine configuration has been completed, port, ip address, the monitor network card, the response network card configurations are complete. The console can receive logs that sent from the engine, but the connection with engine always is non-establish, engine states can’t be queried.
Reduce the number of member network card in the monitor network card to less than three, can normally connect.
Check engine configuration, clock, certificates, etc. are intact. Found the monitor network card member port has four interfaces, the NIP1000 only support less than 3 interfaces added to the monitor network card.
In the NIP monitor NIC, the member interfaces can not be more than three.