FAQ-How does S9300 switch limit the outbound and inbound speed of interface

Publication Date:  2012-10-23 Views:  127 Downloads:  0
Issue Description
Q:
How does S9300 switch limit the outbound and inbound speed of interface?
Alarm Information
NULL
Handling Process
:
1. Interface outbound speed limiting (to 2M)
[Quidway] interface GigabitEthernet 0/0/1
[Quidway-GigabitEthernet0/0/1] qos lr cir 2000 outbound

2. Interface inbound speed limiting (to 10M)
Define acl
[Quidway] acl number 3000
[Quidway-acl-advanced-3000]rule permit ip
Define flow classify, to match this acl:
[Quidway] traffic classifier c1
[Quidway-classifier-c1]if-match acl 3000
Define flow action, configure speed limiting in the action:
[Quidway] traffic behavior b1
[Quidway-behavior-b1] car cir 10000
Define policy, associate flow action and behavior:
[Quidway] traffic policy p1
[Quidway-trafficpolicy-p1]classifier c1 behavior b1
Access to the interface and advertise the policy:
[Quidway] interface GigabitEthernet 0/0/1
[Quidway-GigabitEthernet0/0/1] traffic-policy p1 inbound
Root Cause
NULL
Suggestions
NULL

END