VTL3500恢复出厂配置命令

发布时间:  2014-09-20 浏览次数:  221 下载次数:  0
问题描述
VTL3500设备在开局或者维护过程中,需要将磁带库全部删除掉,。正常情况下,可以在vtl console软件上手动将磁带、磁带库等删除,如果磁带库底层数据库出现异常,则无法手动删除。
告警信息
处理过程
1、SSH登录到VTL命令行
2、停止VTL服务

[root@IPStorVTLSAppliance MegaRAID Storage Manager]# vtl stop

Huawei VTL Server v5.10 (Build 2030)
Copyright (c) 2003-2009 FalconStor Software. All Rights Reserved.

Detaching all Virtual Devices
We recommend stopping all VTL client services prior to shutdown.
Otherwise, data loss may occur.
Are you sure you want to continue? (y/n) [n]: y
Continuing with Detaching all Virtual Devices
Stopping VTL Self Monitor Module                           [  OK  ]
Stopping VTL Server RDE Daemon                             [  OK  ]
Stopping VTL Server IMA Daemon                             [  OK  ]
Stopping VTL FSVSHOST Module                               [  OK  ]
Stopping VTL Statistic Module                              [  OK  ]
Stopping VTL Logger Module                                 [  OK  ]
Stopping VTL SNMPD Module                                  [  OK  ]
Stopping VTL iSCSI (Daemon)                                [  OK  ]
Stopping VTL iSCSI Target Module                           [  OK  ]
Stopping VTL Server Hosted Backup Module                   [  OK  ]
Stopping VTL Server VTL Upcall (32 bit) Daemon             [  OK  ]
Stopping VTL Server VTL Upcall Daemon                      [  OK  ]
Stopping VTL Server VTL Upcall Module                      [  OK  ]
Stopping VTL Server VTL Module                             [  OK  ]
Stopping VTL CLI Proxy Module                              [  OK  ]
Stopping VTL Communication Module                          [  OK  ]
Stopping VTL Server (Application)                          [  OK  ]
Stopping VTL Server (Path Manager) Module                  [  OK  ]
Stopping VTL Server (Event) Module                         [  OK  ]
Stopping VTL Server (Transport)                            [  OK  ]
Stopping VTL Server (Upcall) Module                        [  OK  ]
Stopping VTL Server (FSNBase) Module                       [  OK  ]
Stopping VTL Server (Compression) Module                   [  OK  ]
Stopping VTL Server (HiFn HW Compression) Module 


3、恢复出厂设置

vtl setup

4、启动VTL服务器

vtl start
根因
手动将磁带、磁带库等删除,如果磁带库底层数据库出现异常,则无法手动删除。
建议与总结
请注意:操作前务必与客户确认,恢复出厂后,VTL上磁带上的数据将全部丢失。

END