No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


MCU can't use the web

Publication Date:  2014-04-01 Views:  425 Downloads:  0
Issue Description
MCU can't use the web 
Alarm Information
MCU can't use the web 
Handling Process
  1. Check the PC is using the proxy or not, and it's not.
  2. Use SSH to login the MCU,  to check the software version.
  3. If the software version is ViewPoint 8660 V100R007C01 or before it, use command:system-view telnet-config enable-http 1.
  4. If the software version is ViewPoint 8660 V100R007C02 or after it, use command:system-view telnet-config enable-https 1.
  5. Save the configuration, the command: save.
  6. Reboot the device.
Root Cause
  1. The PC is using the proxy.
  2. The setting on MCU is incorrect.
English case can help the local staff easier.