FusionComputer R3C0 one of CNA node is faulty status and no bootable device

Publication Date:  2014-09-30 Views:  308 Downloads:  0
Issue Description
One of the CNA node turned to be faulty status and when login from BMC remote control, we can see "no bootable device"


Alarm Information
System will auto reboot for there is no bootable device
Handling Process
If we received the "no bootable device" information when operating system start, there are below possible causes:

1, the boot priority has been changed.
2, the boot information was lost.
3, the disk or the raid controller is faulty.

so firstly ,check the boot priority in BIOS, and we found that the first priority boot is network, and not hard drive. 

then change the first boot priority to be hard drive and reboot the server, problem fixed.
Root Cause
Customer changed the boot priority and operating can't start. 
Solution
change the first boot priority to be hard drive and reboot the server
Suggestions

END