FAQ- Changing the Preset Password for the ECC Collector

Publication Date:  2014-10-29 Views:  251 Downloads:  0
Issue Description
 Changing the Preset Password for the ECC Collector
Solution
Prerequisites:
• A PC with an IP address in the same network segment as the ECC collector is prepared, and the PC has been connected to the ECC collector over a switch.
• You have obtained the IP address of the ECC collector.

Procedure:

1) Use a PC that has an IP address in the same network segment with that of the ECC collector, enter https://IP address of the ECC collector in the address bar, and click Enter on the keyboard.

2) Enter the user name admin and the initial password a00001, and click Login.

3) Choose Maintenance > User Management.

4) Select the user you want to change, as shown in Figure 1.

Figure 1 Changing the password for the ECC collector



5) Click Modify.

6) Check Change Password, specify Old Password, New Password, and Confirm for the ECC collector, and then click Confirm, as shown in Figure 2.

Figure 2 Changing the password for the ECC collector (02)





END