eSight(V300R001C10SPC300)与CE12808交换机(V100R002C00SPC200)NetStream的联动,在 eSight上能看到CE12808已经添加到eSight中,但是eSight无法正常采集流量。

发布时间:  2014-10-31 浏览次数:  151 下载次数:  0
问题描述
eSight(V300R001C10SPC300)与CE12808交换机(V100R002C00SPC200)NetStream的联动,在
eSight上能看到CE12808已经添加到eSight中,但是eSight无法正常采集流量
处理过程
1、因eSight能正常添加设备,排除网络问题。
2、CE12808和eSight的端口也是同一端口,排除端口问题。
3、修改CE12808的配置
netstream aggregation ip protocol-port                                         
enable                                                                        
export version 9                                                              
netstream export ip source 10.1.2.1                                           
netstream export ip host 10.1.2.2 6000 
interface 10GE1/0/1                                                
port link-type trunk                                                          
port trunk pvid vlan 110                                                      
port trunk allow-pass vlan 110
netstream inbound ip
netstream outbound ip
netstream sampler random-packets 1200 inbound
netstream sampler random-packets 1200 outbound
修改后配置,此时就能在eSight上看到采集的流量
netstream export ip version 9
netstream export ip source 10.1.2.1
netstream export ip host 10.1.2.2 6000
interface 10GE1/0/1                                                 
port link-type trunk                                                          
port trunk pvid vlan 110                                                      
port trunk allow-pass vlan 110
netstream inbound ip                                                          
netstream outbound ip                                                         
netstream sampler random-packets 1200 inbound                                 
netstream sampler random-packets 1200 outbound  
根因
eSight(V300R001C10SPC300)只支持原始流和部分的聚合流
解决方案
在与eSight(V100R002C00SPC200)做NetStream的联动时,最好用原始流。

END