连接备用主控初次console登陆配置无权限

发布时间:  2014-11-10 浏览次数:  687 下载次数:  0
问题描述
初次配置console登陆配置无权限  详见操作日志

Check file system .... ok.
rootfs loading, please wait...
Now starting VRPV8 ........

Please press Enter to activate this console.
User interface con0 is available


Please Press ENTER.


Please configure the login password (8-16)
Enter Password:
Confirm Password:
Error: The confirm password must be the same with the new password.

Please configure the login password (8-16)
Enter Password:
Confirm Password:
Error: The confirm password must be the same with the new password.

Please configure the login password (8-16)
Enter Password:
Confirm Password:
Info: The max number of VTY users is 5, the number of current VTY users online is 0, and total number of terminal users online is 1.
      The current login time is 2014-11-03 16:18:48.
The device is on PNP state. If you want to setup by manual, you can undo PNP in system view with "undo pnp enable" command.
<HUAWEI>
<HUAWEI>
<HUAWEI>
<HUAWEI>
<HUAWEI>
<HUAWEI>sys
Error: No permission to run the command.
告警信息
Error: No permission to run the command.
处理过程
检查发现设备有两块主控,11是主,12是备。现在的console口插到12号板上了,导致没有权限执行相应命令。
根因
设备有两块主控,11是主,12是备。现在的console口插到12号板上了,导致没有权限执行相应命令。
解决方案
console口插到主用主控登陆成功
建议与总结
“Error: No permission to run the command.”这个提示太委婉了

END