存储S5600T与HP刀片服务器C7000_BL860C兼容案例

发布时间:  2014-11-15 浏览次数:  465 下载次数:  0
问题描述
某项目用到华为存储S5600T,HP公司刀片服务器C7000_BL860C(FC模块HP VC 8GB 24PORT FC MODULE),未配置光纤交换机。现场通过存储与刀片FC模块直连,在刀片没启用VC高级功能时,服务器到存储不通,后经HP工程师配置VC功能可以正常扫描到存储;后面通过两台博科200光纤交换机,FC-SAN组网,在刀片未启用VC功能的情况下也测试通过。
解决方案
1、存储S5600T版本为V100R005C02SPC300,现场S5600T与HP刀片服务器C7000_BL860C通过FC模块直连组网。HP工程师在刀片系统上未启用VC(HP 接口模块的高级功能)时,服务器端在重启到正常过程中,存储端会扫描到WWN号,但服务器正常启动后存储端未连接


2、HP工程师通过配置VC高级功能后,存储与刀片服务器直连,端口信息显示正常,并在刀片服务器端可以正常发现存储

3、刀片服务器端扫描存储,可以正常发现
# ioscan -nfCdisk
Class     I  H/W Path  Driver S/W State   H/W Type     Description
==================================================================
disk      0  0/0/0/2/0/0/0.0.0          sdisk   CLAIMED     DEVICE       HP
LOGICAL VOLUME
                      /dev/dsk/c0t0d0     /dev/dsk/c0t0d0s3   /dev/rdsk/c0t0d0s2
                      /dev/dsk/c0t0d0s1   /dev/rdsk/c0t0d0    /dev/rdsk/c0t0d0s3
                      /dev/dsk/c0t0d0s2   /dev/rdsk/c0t0d0s1
disk      4  0/0/0/5/0/0/0.1.0.0.0.0.0  sdisk   CLAIMED     DEVICE       HUAWEI
S5600T
                      /dev/dsk/c7t0d0   /dev/rdsk/c7t0d0
disk      2  0/0/0/5/0/0/0.1.4.0.0.0.0  sdisk   CLAIMED     DEVICE       HUAWEI
S5600T
                      /dev/dsk/c3t0d0   /dev/rdsk/c3t0d0
disk      5  0/0/0/5/0/0/1.1.0.0.0.0.0  sdisk   CLAIMED     DEVICE       HUAWEI
S5600T
                      /dev/dsk/c9t0d0   /dev/rdsk/c9t0d0
disk      3  0/0/0/5/0/0/1.1.4.0.0.0.0  sdisk   CLAIMED     DEVICE       HUAWEI
S5600T
                      /dev/dsk/c5t0d0   /dev/rdsk/c5t0d0
# ioscan -m dsf
Persistent DSF           Legacy DSF(s)
/dev/rdisk/disk1         /dev/rdsk/c0t0d0
/dev/rdisk/disk1_p2      /dev/rdsk/c0t0d0s2
/dev/rdisk/disk1_p3      /dev/rdsk/c0t0d0s3
/dev/rdisk/disk1_p1      /dev/rdsk/c0t0d0s1
/dev/pt/pt5              /dev/rscsi/c2t0d0
                         /dev/rscsi/c4t0d0
                         /dev/rscsi/c6t0d0
                         /dev/rscsi/c8t0d0
/dev/rdisk/disk6         /dev/rdsk/c3t0d0
                         /dev/rdsk/c5t0d0
                         /dev/rdsk/c7t0d0
                         /dev/rdsk/c9t0d0
# pvcreate /dev/rdisk/disk6
Physical volume "/dev/rdisk/disk6" has been successfully created.
# diskinfo -v /dev/rdisk/disk6
SCSI describe of /dev/rdisk/disk6:
             vendor: HUAWEI
         product id: S5600T
               type: direct access
               size: 52428800 Kbytes
   bytes per sector: 512
          rev level: 2105
    blocks per disk: 104857600
        ISO version: 0
       ECMA version: 0
       ANSI version: 4
    removable media: no
    response format: 2
   (Additional inquiry bytes: (32)32 (33)31 (34)30 (35)35 (36)0 (37)0 (38)0 (39
0 (40)0 (41)0 (42)0 (43)0 (44)0 (45)0 (46)0 (47)0 (48)0 (49)0 (50)0 (51)0 (52)0
(53)0 (54)0 (55)0 (56)0 (57)0 (58)9 (59)60 (60)8 (61)c0 (62)0 )

4、现场通过光纤交换机组网,刀片服务器端未启用VC高级功能也能正常发现存储
5、建议遇到类似场景,需确认存储与服务器的兼容性

END