FAQ-NE40E pos 155M光模块在display elabel里读出100M,是否正常?

发布时间:  2014-12-31 浏览次数:  407 下载次数:  0
问题描述
pos光模块,在display elabel读取出的速率和display interface不一样

Display elabel读取出的是100M的速率,display interface为155M

[Board Properties]
BoardType=CR53P4CF0
BarCode=030JTY10D8000034
Item=03030JTY
Description=NetEngine80E,CR53P4CF0,4-port OC-3c/STM-1c POS-SFP Flexible Card
Manufactured=2013-08-10
VendorName=Huawei
IssueNumber=00
CLEICode=
BOM=                                     


[Board Properties]
BoardType=MXPD-033S      
BarCode=HA13210520994  
Item=
Description=100Mb/s-1310nm-LC-15km(0.009mm)          //显示的是100M
Manufactured=2013-05-25
VendorName=HG GENUINE     
IssueNumber=
CLEICode=
BOM=


Pos4/1/0 current state : UP
Line protocol current state : UP
Last line protocol up time : 2014-02-22 10:34:08 UTC+08:00
Description:NC-GA-AR01-NE20E-S8 POS 0/2/0
Route Port,The Maximum Transmit Unit is 4470, Hold timer is 10(sec)
Internet Address is 10.237.7.161/30
Link layer protocol is PPP
LCP opened, IPCP opened, OSICP opened, MPLSCP opened
The Vendor PN is MXPD-033S
The Vendor Name is HG GENUINE
Port BW: 155M, Transceiver max BW: 155M, Transceiver Mode: SingleMode  //接口下还是155M的
WaveLength: 1310nm, Transmission Distance: 15km


如下解释:

以接口下显示的155m为准  

elabel读的是光模块内部的寄存器,是整数0X01,以100M为单位。不会影响实际的速率,可以正常使用。
解决方案

END