FAQ-How Do I Obtain the Serial Number of a Modular Switch

Publication Date:  2015-03-25 Views:  6756 Downloads:  0
Issue Description
How Do I Obtain the Serial Number of a Modular Switch?
Solution
Obtaining the Chassis Serial Number
  • In a standalone switch:
Log in to the switch through Telnet or the console interface, and then run the display elabel backplane command in the user view to display the electronic label information. The BarCode field in the command output shows the chassis serial number.

<Quidway> display elabel backplane
Info: It is executing, please wait...
[BackPlane_1]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=EH02BAKK
BarCode=2102113089P0BB000881
Item=02113089
……………
  • In a cluster:
Log in to the master switch through Telnet or the console interface, and then run the display elabel backplane chassis chassis-id command (chassis-id specifies the CSS ID of a member chassis) in the user view to display the electronic label information. The BarCode field in the command output shows the serial number of the specified chassis.

<Quidway> display elabel backplane chassis ?
  INTEGER<1-2>  Chassis ID                                                    

<Quidway> display elabel backplane chassis 2
Info: It is executing, please wait...                                          
                                                                               
[BackPlane_2]                                                                 
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0

[Board Properties]                                                             
BoardType=EH02BAKK
BarCode=2102113089P0BB000881                                                      
Item=02113549                                                                  
……………


   NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the chassis ID according to the help information.

Obtaining the Serial Number of a Card
Log in to the master switch through Telnet or the console interface, and then run the display elabel command in the user view and specify a slot ID according to help information to display the electronic label of a card. The BarCode field in the command output shows the serial number of the card.

<Quidway> display elabel ?
  <1-1>      The present chassis                                               
  backplane  Backplane                                                         
  brief      Display information briefly                                       
<Quidway> display elabel 1/?
  <4,6-8>                              <CMU1>
  <FAN1-FAN2>                          <PWR1-PWR2>
<Quidway> display elabel 1/6 brief
Info: It is executing、please wait...                                          
                                                                               
[Slot_6]                                                                      
/$[Board Integration Version]                                                  
/$BoardIntegrationVersion=3.0                                                  
                                                                               
[Main_Board]                                                                   
/$[ArchivesInfo Version]                                                       
/$ArchivesInfoVersion=3.0                                                      
                                                                               
[Board Properties]                                                             
BoardType=ET1D2S08SX1E
BarCode=020LVF6TBB000043                                                
Item=03020LVF                                                                   
……………


    NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the slot ID according to the help information.

Obtaining the Serial Number of a Power Module
Log in to the master switch through Telnet or the console interface, and then run the display elabel command in the user view and specify a slot ID according to help information to display the electronic label of a power module. The SN field in the command output shows the serial number of the power module.

<Quidway> display elabel ?
  <1-1>      The present chassis                                               
  backplane  Backplane                                                         
  brief      Display information briefly                                       
<Quidway> display elabel 1/?
  <5,8,13,16>                             <CMU1>
  <FAN1-FAN5>                             <PWR1-PWR4>
<Quidway> display elabel 1/PWR1
Info: It is executing, please wait...                                          
                                                                               
[Slot_21]                                                                      
/$[Board Integration Version]                                                  
/$BoardIntegrationVersion=3.0                                                  
                                                                               
[Main_Board]                                                                   
DATE=13_02_08                                                                  
SN=A664A0212080086V0.9A


   NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the power module ID according to the help information.

Obtaining the Serial Number of a Fan Module
Log in to the master switch through Telnet or the console interface, and then run the display elabel command in the user view and specify a slot ID according to help information to display the electronic label of a fan module. The BarCode field in the command output shows the serial number of the fan module.

<Quidway> display elabel ?
  <1-1>      The present chassis                                               
  backplane  Backplane                                                         
  brief      Display information briefly                                       
<Quidway> display elabel 1/?
  <5,8,13,16>                             <CMU1>
  <FAN1-FAN5>                             <PWR1-PWR4>
<Quidway> display elabel 1/FAN2
Info: It is executing, please wait...                                          
                                                                               
[Slot_18]                                                                      
/$[Board Integration Version]                                                  
/$BoardIntegrationVersion=3.0                                                  
                                                                               
[Main_Board]                                                                   
/$[ArchivesInfo Version]                                                       
/$ArchivesInfoVersion=3.0                                                      
                                                                               
[Board Properties]                                                             
BoardType=LE02FCMC                                                             
BarCode=2103010JTF0123456789                                            
Item=02120995                                                                  
……………


   NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the fan module ID according to the help information.

END