FAQ-Can Rate Limiting Be Configured for an Eth-Trunk on a Modular Switch and How Can the Configuration Take Effect

Publication Date:  2015-03-25 Views:  200 Downloads:  0
Issue Description
Can Rate Limiting Be Configured for an Eth-Trunk on a Modular Switch and How Can the Configuration Take Effect?
Solution
The modular switches support rate limiting for inbound traffic on an Eth-Trunk. This function can be configured using the qos car command. After this command is executed:
  • If the member interfaces of the Eth-Trunk are located on different LPUs, the configured rate limit applies to each interface individually.
  • If the member interfaces of the Eth-Trunk are located on the same LPU, the member interfaces share the bandwidth specified by the rate limit. The bandwidth is distributed on the member interfaces randomly.

END