No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


FAQ-How Do I Verify That an Interface Is Added to a VLAN

Publication Date:  2015-04-30 Views:  548 Downloads:  0
Issue Description
How Do I Verify That an Interface Is Added to a VLAN?
Run the display vlan vlan-id command and verify that the interface is listed in the command output.

For example, interface Ethernet0/0/1 is added to VLAN 10.

[Huawei]display vlan 10                                                 
* : management-vlan                                                            
VLAN ID Type         Status   MAC Learning Broadcast/Multicast/Unicast Property
10      common       enable   enable       forward   forward   forward default 
Untagged      Port: Ethernet0/0/1                                              
Active Untag  Port: Ethernet0/0/1                                              
Interface                   Physical                                           
Ethernet0/0/1               UP