No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-What Are Differences of Easy IP and Address Pool

Publication Date:  2015-05-05 Views:  2165 Downloads:  0
Issue Description
What Are Differences of Easy IP and Address Pool?
Solution
Easy IP uses the public IP address of an interface as the translated source address, as shown in Figure 1.
Figure 1 Networking of Easy IP



When the address pool mode is used, you need to configure a public address pool from which public addresses mapping private addresses are selected, as shown in Figure 2.

Figure 2 Networking of an address pool 



Use Easy IP or address pool according to planning of public IP addresses:
  • If there are idle public IP addresses after IP addresses of outbound interfaces on NAT devices and other applications are configured, use the address pool mode.
  • If there are no idle public IP addresses after IP addresses of outbound interfaces on NAT devices and other applications are configured, use Easy IP.

END