FAQ:how to config the ip address pool authentification for each ip phone register

Publication Date:  2015-06-22 Views:  212 Downloads:  0
Issue Description
customer require config the ip address pool authentification for each ip phone register 
Solution

solution:

1.    config add addresspool index [0-n] startip x.x.x.x endip x.x.x.x

config delete addresspool index [0-n] startip x.x.x.x endip x.x.x.x

config modify addresspool index [0-n] startip x.x.x.x endip x.x.x.x

show addresspool

for U1911, n maximum is 29

 

2.   when config a new regsiter user authentification, the new-added authentification type is authbyaddrpool, meanwhile config the corresponding ip address pool index, if you config the pooltype as all, means support register in every ip address pool. if you config the pooltype as single, means only support the ip phone register to PBX in this ip address pool.

       for example:

config add sipue eid 5000 authorizationtype authbyaddrpool pooltype single/all poolindex x

config add batch sipue eid 5000 authorizationtype authbyaddrpool pooltype single/all poolindex x number x

   config modify batch sipue eid 5000 authorizationtype authbyaddrpool pooltype single/all poolindex x number x

   config modify sipue eid 5000 authorizationtype authbyaddrpool pooltype single/all poolindex x

show sipue

 

3.   when the ip phone register, if the user authentification type set as authbyaddrpool,  the PBX will judge whether the register ip is in the configged ip address pool of that index.

END