FAQ-Why Does an AC Fail to Report Unauthorized APs After Calibration Is Enabled

Publication Date:  2015-06-25 Views:  148 Downloads:  0
Issue Description
Why Does an AC Fail to Report Unauthorized APs After Calibration Is Enabled?
Solution
The possible causes are:

Unauthorized AP detection is not enabled when calibration is enabled on the AC.

After the calibration command is executed, the AC does not send neighbor detection messages to APs.

APs do not receive neighbor detection messages from the AC.

APs are not enabled to detect neighbors.

APs do not report detected information to the AC.

The AC does not receive neighbor information sent from APs.

Errors occur when the AC is saving received neighbor information.

END