Failed to Access the Web Page of an IPC on a Windows Server 2008

Publication Date:  2015-06-27 Views:  126 Downloads:  0
Issue Description
Applicable Models:
All IPC models.

Symptom:

When you press Enter after entering the IP address of an IPC in the address box of Internet Explorer, the page shown in Figure 1 is displayed. The login fails.

Figure 1 Error page upon login failure

Handling Process
Step 1 Disable Internet Explorer Enhanced Security Configuration on the Windows Server 2008.

Open Control Panel on the Windows Server 2008, choose Administrative Tools > Server Manager > Configure IE ESC. In the Internet Explorer Enhanced Security Configuration dialog box that is displayed, disable advanced security settings, as shown in Figure 2 and Figure 3.

Figure 2 Disabling advanced security settings



Figure 3 Disabling advanced security settings



Step 2 Check whether the fault is rectified.
  • If yes, no further operation is required.
  • If no, contact your service provider for assistance.
----End
Root Cause
The Internet Explorer Enhanced Security Configuration option is enabled on the Windows Server 2008.

END