FAQ-After VRRP HSB Is Deployed on ACs, the AP Status on the Active AC Is Normal. Is the AP Status on the Standby AC Automatically Backed Up

Publication Date:  2015-06-27 Views:  258 Downloads:  0
Issue Description
After VRRP HSB Is Deployed on ACs, the AP Status on the Active AC Is Normal. Is the AP Status on the Standby AC Automatically Backed Up?
Solution
No, the AP status on the standby AC cannot be automatically backed up on ACs. APs must be added offline on the standby AC; otherwise, the AP status on the standby AC will not switch to standby. Before the active and standby ACs go online, the APs must be added offline on the ACs. If an AP is added offline on the standby AC after the active AC goes online, the status of the AP on the standby AC is Fault. In this case, run the undo hsb enable and then hsb enable commands in the HSB backup group of the standby AC so that information on the active AC is synchronized to the standby AC. The status of the AP is switched to Standby on the standby AC.

END