FAQ-Why Cannot an OSPF Neighbor Relationship Be Established Between the Interconnected Firewall and NE40E When OSPF MD5 Authentication Is Configured on the Devices

Publication Date:  2015-07-01 Views:  156 Downloads:  0
Issue Description
Why cannot an OSPF neighbor relationships be established between the interconnected firewall and NE40E when the ospf authentication-mode md5 command is run on the devices?
Solution
OSPF authentication is configured only on the interface connecting the firewall to the NE40E. Therefore, run the authentication-mode md5 command in the area where the interface resides to enable the OSPF authentication mechanism. OSPF authentication needs to be configured only on the interface connecting the NE40E to the firewall.

For example:


ospf 1                                                                                                                              
area 0.0.0.1                                                                                                                       
  network 56.1.1.0 0.0.0.255                                                                                                        
  network 222.66.56.0 0.0.0.255                                                                                                     
  authentication-mode md5

interface GigabitEthernet0/0/2                                                                                                                                                                                                                       
ip address 222.66.56.181 255.255.255.252                                                                                           
ospf authentication-mode md5 1 cipher 'OERX_4UNC+Q=^Q`MAF4<1!!

END