No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
MENU

FAQ-What If "got NOTIFY of type INVALID_ID_INFORMATION" or "drop message from A.B.C.D due to notification type INVALID_ID_INFORMATION" Is Displayed During IPSec Debugging

Publication Date:  2015-07-02 Views:  698 Downloads:  0
Issue Description
What If "got NOTIFY of type INVALID_ID_INFORMATION" or "drop message from A.B.C.D due to notification type INVALID_ID_INFORMATION" Is Displayed During IPSec Debugging?
Solution
This is caused by ACL differences on both IPSec interfaces. In actual applications, ACLs are used to establish security tunnels on per data flow basis for data protection. In this case, you need to check the ACLs in the security policies configured at both ends of the tunnel for any ACL mismatch. If the ACLs do not match, set the ACLs at both ends to be mutually mirrored.

END