强制移除主机后重新添加主机关联数据存储异常

发布时间:  2015-07-07 浏览次数:  158 下载次数:  0
问题描述

(1)   现场工程师将故障主机从FusionCompute上面强制移除,主机硬件恢复后,重新在FusionCompute里面添加主机,在添加数据存储时失败。

 

处理过程
(1)   分析CNA节点日志发现这个数据存储被添加过:
2015-05-05 15:57:23,034] [INFO ] [006715] [006759] [server-marshal.c 3228] [BSB] bsbAddDatastoreMarshal
[2015-05-05 15:57:23,035] [INFO ] [006715] [006759] [server-marshal.c 3247] [BSB] version [0]
[2015-05-05 15:57:23,035] [INFO ] [006715] [006759] [handlers_bsb.c 1470] [BSB] add datastore parameter :storageType(svir),datastoreId(20),cuSize(32768),blockSize(4096),isFormat(0)
[2015-05-05 15:57:23,035] [ERROR] [006715] [006759] [vbs_storage.c 403] [BSB] devpath scsi-3600b342348e1702d2997dc45fd0000d1 have been added.
[2015-05-05 15:57:23,035] [ERROR] [006715] [006759] [handlers_bsb.c 1593] [BSB] create device info scsi-3600b342348e1702d2997dc45fd0000d1 for default_svir failed
[2015-05-05 15:57:23,035] [ERROR] [006715] [006759] [server-marshal.c 3306] [BSB] BSB: doBsbAddDatastore() failed. error=1
[2015-05-05 15:57:23,035] [INFO ] [006715] [006759] [server-marshal.c 3328] [BSB] BSB: bsbAddDatastoreMarshal finished.
[2015-05-05 15:57:23,612] [INFO ] [006715] [009237] [handlers_xen.c 1572] [CNA] checkUsbListInfor: virNodeGetUsbCount = 0
[2015-05-05 15:57:23,612] [INFO ] [006715] [009237] [handlers_xen.c 3367] [CNA] refresh_gpu_info enter
(2)   如果主机故障,从FusionCompute上强制移除后,只是将VRM数据库中的信息删除,CNA节点的bsb数据库没有清理,存在残留。
(3)   针对此情况,需要在FusionCompute上面强制移除主机后,重新安装主机的操作系统,然后按照正常流程添加主机,添加数据存储。
根因
针对此情况,需要在FusionCompute上面强制移除主机后,重新安装主机的操作系统,然后按照正常流程添加主机,添加数据存储。

END