If the power-on sequence of disk enclosures is not the physical connection sequence, how can I change the power-on sequence?
The example here uses one controller enclosure and four disk enclosures to clarify how to power on disk enclosures according to their physical connection sequence.
1. The power-on sequence of disk enclosures is determined by how they were powered on for the first time. Therefore, to change the power-on sequence, you need to clear the DB data first. Clear the DB data.
On the CLI, run the clearcofferdb command.
2. Power on the disk enclosures one by one.
Power on the controller enclosure and the first disk enclosure.