2台S9300 设备堆叠之后,业务不通

发布时间:  2015-12-04 浏览次数:  246 下载次数:  0
问题描述

2台S9300设备堆叠之后,业务不通

告警信息







处理过程

1.查看log.log文件,发现有主备倒换现象

Sep 11 2015 20:19:09 Office-core %%01ALML/4/ENTRESET(l)[3428]:LPU frame[1] board[2] is reset. The reason is: Board reset by VRP command or net manager.

Sep 13 2015 11:37:50 Quidway %%01ALML/4/MASTER_TO_SLAVE(l)[0]:MPU Slot25 changes to slave.

Sep 13 2015 11:38:12 Quidway %%01CSSM/4/CSSBACKUP(l)[1]:This cluster CSS compete result is backup.

2.主备倒换后,1框切换成备,2框为主,但由于2框license不匹配,触发业务口堆叠失效

Nov 10 2015 11:21:22 Office-core GTL/2/NEARDEADLINE:OID 1.3.6.1.4.1.2011.5.25.142.2.3 License feature All is near deadline, remain time is 1 days.

Nov 11 2015 11:21:22 Office-core GTL/2/NEARDEADLINE:OID 1.3.6.1.4.1.2011.5.25.142.2.3 License feature All is near deadline, remain time is 0 days.

Nov 12 2015 11:21:22 Office-core GTL/2/NEARDEADLINE:OID 1.3.6.1.4.1.2011.5.25.142.2.3 License feature All is near deadline, remain time is 0 days.

Nov 12 2015 11:36:40 Office-core %%01GTL/4/STATECHANGED(l)[26082]:License state changed from Trial to Default.

Nov 12 2015 11:36:40 Office-core GTL/2/DEFAULTVALUE:OID 1.3.6.1.4.1.2011.5.25.142.2.1 Current license value is default, the reason is Esn mismatch.

Nov 12 2015 11:36:40 Office-core %%01CSSM/4/PORTNOAVAILABLE(l)[26083]:CSS port 2/10/0/1 has been unavailable. Reason: Css port down.

3.请客户反馈对应的license文件,发现堆叠设备对应的license包含的是单台设备的esn。


根因
S9300业务口集群特性需要License支持,申请License时,需要输入两个框的ESN
解决方案

先获取license失效码,重新申请license, 堆叠license必须包含两个框的ESN

建议与总结

S9300业务口集群特性需要License支持,且在集群建立前,需要在主备框分别加载license。集群License需要包含两个框的ESN,如果申请的License里面只有一个ESN号且为主框的ESN号,则备框的License将无法激活,集群可以建立,但是倒换后License控制的特性丢失,需要重新申请License;如果申请的License里面只有一个ESN号且为备框的ESN号,则License将无法被激活。

END