s7700 log中日志的含义和计算方式

发布时间:  2016-05-31 浏览次数:  238 下载次数:  0
问题描述

s7700 日志信息中如下如下告警,标红部分90%代表什么意思?标绿色部分的log信息是降到90%的阈值以下产生的,还是超过90%以上产生的,interface=67怎么计算对应物理接口?

告警信息

GigabitEthernet1/0/1 current state : UP

Line protocol current state : UP

Description:fuyong p3-3

Switch Port, PVID : 3502, TPID : 8100(Hex), The Maximum Frame Length is 9216

IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 30d1-7eb4-c700

Last physical up time   : 2015-10-08 14:21:45

Last physical down time : 2015-10-08 14:20:02

Current system time: 2015-12-23 09:05:28

Port Mode: COMMON COPPER

Speed : 1000,   Loopback: NONE

Duplex: FULL,   Negotiation: ENABLE

Mdi   : AUTO,   Flow-control: DISABLE

Last 300 seconds input rate 69546312 bits/sec, 6290 packets/sec

Last 300 seconds output rate 36775776 bits/sec, 3326 packets/sec

Input peak rate 617076544 bits/sec, Record time: 2015-10-08 14:19:05

Output peak rate 999994640 bits/sec, Record time: 2015-12-13 05:02:28

 

Input:  441256952192 packets, 609806807428157 bytes

  Unicast:                          0,  Multicast:                441256952173

  Broadcast:                       16,  Jumbo:                               0

  Discard:                          0,  Pause:                               0

 

  Total Error:                      6

  CRC:                              0,  Giants:                              3

  Jabbers:                          0,  Fragments:                           0

  Runts:                            0,  DropEvents:                          0

  Alignments:                       0,  Symbols:                             3

  Ignoreds:                         0,  Frames:                              0

 

Output:  492607871987 packets, 680771335759845 bytes

  Unicast:                          0,  Multicast:                492607871987

  Broadcast:                        0,  Jumbo:                               0

  Discard:                          0,  Pause:                               0

 

  Total Error:                      0

  Collisions:                       0,  ExcessiveCollisions:                 0

  Late Collisions:                  0,  Deferreds:                           0

  Buffers Purged:                   0

 

 Input bandwidth utilization threshold : 90.00%

 Output bandwidth utilization threshold: 90.00%

 

------------------------------------------------------

 

 

Dec 22 2015 16:30:24 S7700-pri %%01IFNET/4/BWRATE_OUT_RISING(l)[284]:Interface output flow bandwidth usage exceeded the log threshold. (Interface=66, BandWidthUsage=90, LogThreshold=90)

Dec 22 2015 16:29:47 S7700-pri %%01IFNET/4/BWRATE_OUT_RISING(l)[285]:Interface output flow bandwidth usage exceeded the log threshold. (Interface=67, BandWidthUsage=90, LogThreshold=90)

处理过程

出方向利用率超过90%的默认阈值时,会产生告警

 

Interface67是平台的接口管理记录的索引号

 

这个可以通过:

 

[diag] display ifnet ifnet index-map

通过查询的端口索引找到对应的物理接口

解决方案
出方向利用率超过90%的默认阈值时,会产生告警 ;Interface=67是平台的接口管理记录的索引号,可以在诊断视图下用命令 display ifnet ifnet index-map查询的端口索引找到对应的物理接口

END