USG6360配置双机热备时VRID错误导致主备关系建立失败

发布时间:  2016-04-27 浏览次数:  148 下载次数:  0
问题描述

两台USG6360配置双机热备功能后主备关系建立失败。

处理过程

1.       在主墙上输入display hrp group查看当前VGMP管理组的信息,结果如下:

Active group status:

   Group enabled:         yes

   State:                 active

   Priority running:      65001

   Total VRRP members:    2

   Hello interval(ms):    1000

   Preempt enabled:       yes

   Preempt delay(s):      60

   Tcp check delay(s):    0

   Peer group available:  0

   Peer's member same:    yes

 Standby group status:

   Group enabled:         no

   State:                 initialize

   Priority running:      65000

   Total VRRP members:    0

   Hello interval(ms):    1000

   Preempt enabled:       yes

   Preempt delay(s):      0

   Tcp check delay(s):    0

   Peer group available:  0

   Peer's member same:    yes

 

然后再输入display hrp state查看HRP的状态信息,结果如下:

The firewall's config state is: ACTIVE

 Backup channel usage: 0.00%

 Time elapsed after the last switchover: 0 days, 18 hours, 20 minutes

 Current state of virtual routers configured as active:

             GigabitEthernet1/0/1    vrid   2 : active (peer down)

             GigabitEthernet1/0/0    vrid   1 : active (peer down)

 Current state of interfaces tracked by active:

             GigabitEthernet1/0/1 : up 

             GigabitEthernet1/0/0 : up 

2.       查看设备的相关配置信息发现主备墙两端配置的VRRP备份组组号不一致,具体如下:

主墙的相关配置:

#

 interface GigabitEthernet1/0/0

 ip address 192.168.25.34 255.255.255.224

 vrrp vrid 1 virtual-ip 192.168.25.33 active

 hrp track active

#

interface GigabitEthernet1/0/1

 ip address 192.168.25.5 255.255.255.224

 vrrp vrid 2 virtual-ip 192.168.25.4 active

 hrp track active

#

备墙的相关配置:

#

interface GigabitEthernet1/0/0

ip address 192.168.25.35 255.255.255.224

 vrrp vrid 2 virtual-ip 192.168.25.33 standby

 hrp track standby

#

interface GigabitEthernet1/0/1

 ip address 192.168.25.6 255.255.255.224

 vrrp vrid 1 virtual-ip 192.168.25.4 standby

 hrp track standby

#

根因
主备墙两端配置的VRRP备份组组号不一致
解决方案

将备墙那两个接口下的VRRP备份组组号调换一下即可,修改后的结果如下:

#

interface GigabitEthernet1/0/0

 ip address 192.168.25.34 255.255.255.224

 vrrp vrid 1 virtual-ip 192.168.25.33 active

 hrp track active

#

interface GigabitEthernet1/0/1

 ip address 192.168.25.5 255.255.255.224

 vrrp vrid 2 virtual-ip 192.168.25.4 active

 hrp track active

#

备墙的相关配置:

#

interface GigabitEthernet1/0/0

ip address 192.168.25.35 255.255.255.224

 vrrp vrid 1 virtual-ip 192.168.25.33 standby

 hrp track standby

#

interface GigabitEthernet1/0/1

ip address 192.168.25.6 255.255.255.224

 vrrp vrid 2 virtual-ip 192.168.25.4 standby

 hrp track standby

#

END