FAQ-NE40E V600R008C10SPC300 如何确认告警提示的接口索引对应的物理接口

发布时间:  2016-07-12 浏览次数:  1852 下载次数:  0
问题描述

设备信息:NE40E&80E V600R008C10SPC300

如何查看设备告警信息中提示的接口索引对应的哪个物理接口?

Jul 1 2016 09:07:59+08:00 ZZA0W40WA01_WANPE %%01IFNET/4/BWRATE_OUT_RESUME(l)[0]:Slot=5,Vcpu=0;Interface output flow bandwidth usage was restored to the log threshold. (Interface=10, BandWidthUsage=39, LogThreshold=80)
Jul 1 2016 09:07:58+08:00 ZZA0W40WA01_WANPE %%01IFNET/4/BWRATE_OUT_RISING(l)[1]:Slot=5,Vcpu=0;Interface output flow bandwidth usage exceeded the log threshold. (Interface=10, BandWidthUsage=91, LogThreshold=90)
Jul 1 2016 08:57:21+08:00 ZZA0W40WA01_WANPE %%01IFNET/4/BWRATE_OUT_RESUME(l)[2]:Slot=5,Vcpu=0;Interface output flow bandwidth usage was restored to the log threshold. (Interface=10, BandWidthUsage=42, LogThreshold=80)
Jul 1 2016 08:57:21+08:00 ZZA0W40WA01_WANPE %%01IFNET/4/BWRATE_IN_RESUME(l)[3]:Slot=5,Vcpu=0;Interface input flow bandwidth usage was restored to the log threshold. (Interface=10, BandWidthUsage=41, LogThreshold=80)
Jul 1 2016 08:57:20+08:00 ZZA0W40WA01_WANPE %%01IFNET/4/BWRATE_OUT_RISING(l)[4]:Slot=5,Vcpu=0;Interface output flow bandwidth usage exceeded the log threshold. (Interface=10, BandWidthUsage=97, LogThreshold=90)

解决方案

用户视图下执行display mib-index interface可以查看接口索引和实际物理端口的对应关系。

<TAC-NE20ES8>display  mib-index  interface 
IfName                          IfIndex   PortIndex
---------------------------------------------------
Eth-Trunk11                     3724      --      
Eth-Trunk12                     3725      --      
GigabitEthernet0/0/0            4         --      
GigabitEthernet0/1/0            8         --      
GigabitEthernet0/1/1            9         --      
GigabitEthernet0/1/2            10        --      
GigabitEthernet0/1/3            11        --      
GigabitEthernet0/1/4            12        --      
GigabitEthernet0/1/5            13        --      
GigabitEthernet0/1/6            14        --      
GigabitEthernet0/1/7            15        -- 

END