OSPF v3 status information fails to be delivered by SNMP

Publication Date:  2016-10-31 Views:  338 Downloads:  0
Issue Description

When OSPF status information is being extracted from USG, no useful information is displayed, only message: No Such Object available on this agent at this OID is reported.

For example:                    

# snmpwalk -Os -c <community_name> -v 2c <firewall IP> 1.3.6.1.4.1.2011.5.25.147.1.1

enterprises.2011.5.25.147.1.1 = No Such Object available on this agent at this OID

Device is firewall USG6600 with software version V100R001C30SPC600.

Other information is extracted successfully from the device, for example, BGP status information.



Alarm Information

# snmpwalk -Os -c <community_name> -v 2c <firewall IP> 1.3.6.1.4.1.2011.5.25.147.1.1

enterprises.2011.5.25.147.1.1 = No Such Object available on this agent at this OID



Handling Process

1. Verified OID tree to correspond with OIDs from product documentation. OIDs are correct and this doesn’t seem to be the issue.

2. Simulate the issue in lab, the same behavior is displayed.

3. Consult RnD team.



Root Cause

In order for OSPF information to be extracted, first it’s needed to be bided with MIB.



Solution

[USG] ospf  mib-binding process-id” needs to be imputed on firewall to associate MIB with OSPF process-id.



Suggestions
The command description is missing from Product documentation and it will be added on next revision.

END