FAQ-WLAN设备如何关闭无线信号

发布时间:  2016-12-19 浏览次数:  51 下载次数:  0
问题描述
WLAN设备如何关闭无线信号?
解决方案
在WLAN的实际使用中,由于绿色节能或安全等原因,用户可关闭AP射频或WLAN服务,方法如下:

1、去使能指定射频。

- 针对AC+FIT组网
V200R005版本:
[AC6605] wlan
[AC6605-wlan-view] ap 0 radio 0
[AC6605-wlan-radio-0/0] undo radio enable
V200R006版本:
[AC6605] wlan
[AC6605-wlan-view] ap-id 1
[AC6605-wlan-ap-1] radio 0
[AC6605-wlan-radio-1/0] radio disable
Warning: This action may cause service interruption. Continue?[Y/N]y

- 针对FAT AP
V200R005版本:
[Huawei] interface wlan-radio 0/0/0
[Huawei-Wlan-Radio0/0/0] undo radio enable
V200R006版本:
[Huawei] interface wlan-radio 0/0/0
[Huawei-Wlan-Radio0/0/0] radio disable
Warning: This action may cause service interruption. Continue?[Y/N]y

2、配置特定时间内禁止用户接入WLAN网络。

V200R005版本:
[AC6605] wlan
[AC6605-wlan-view] auto-off service ess service-set id 0 start-time 01:00:00 end-time 07:00:00 //配置ID为0的服务集关闭的时间段为1:00:00到7:00:00。
V200R006版本:
[HUAWEI]wlan
[HUAWEI-wlan-view]vap-profile name vap1
[HUAWEI-wlan-vap-prof-vap1]auto-off service start-time 1:00:00 end-time 7:00:00 //配置VAP定时关闭的时间段为1:00:00到7:00:00

3、使用auto-off service radio命令用来定时关闭AP的射频功能。(V200R005版本)

针对AC+FIT组网
[AC6605] wlan
[AC6605-wlan-view] auto-off service radio ap-id 0 radio-id 0 start-time 1:00:00 end-time 7:00:00 //配置AP 0射频0关闭的时间段为1:00:00到7:00:00。

针对FAT AP
[Huawei] wlan
[Huawei-wlan-view] auto-off service radio interface wlan-radio0/0/0 start-time 1:00:00 end-time 7:00:00 //配置AP接口wlan-radio0/0/0关闭的时间段为1:00:00到7:00:00。

END