No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


Configuration not working on CE7800

Publication Date:  2017-03-06 Views:  760 Downloads:  0
Issue Description

We want to add interface 40GE1/0/9 to Eth-trunk 1. As you can see below, the following error occurs.

[~CE-40GE1/0/9]eth-trunk 1
Error: The parameter of trunk command is invalid, because the trunk has added member of other port-type.
The error port is 40GE1/0/9.

If we check the interface, we see that no configuration is under this interface.

[~CE-40GE1/0/9]dis this #
interface 40GE1/0/9 #

We check also Eth-trunk and no interface is added.

The reason is we have inactive configuration on our device. If we use command clear inactive-configuration all inactive configuration will be erased. After we can add interface 40GE1/0/9 to Eth-trunk 1.