FAQ 为什么S5700 set save-configuration interval 43200这条命令配置后没有达到周期就自动保存

发布时间:  2017-04-26 浏览次数:  378 下载次数:  0
问题描述

在S5700 配置命令 set save-configuration interval 43200后,没有达到1个月的周期,设备也会自动保存

如下可以看到2次保存的间隔并没有1个月

Mar 24 2017 01:29:51+08:00 BJ-OA-57-01 %%01CFM/5/SAVE_FILE_RECORD(s)[7393]:The system automatically saved the current configuration to the file. (FileName=flash:/vrpcfg.zip)
Mar 24 2017 01:29:52+08:00 BJ-OA-57-01 HWCM/4/CFGCHANGE:OID 1.3.6.1.4.1.2011.6.10.2.1 Configure changed. (EventIndex=30, CommandSource=4, ConfigSource=2, ConfigDestination=4)
Mar 24 2017 01:29:52+08:00 BJ-OA-57-01 HWCM/4/HWCM_B2S_BACKUP:OID 1.3.6.1.4.1.2011.6.10.2.6 Began to back up the current configuration to the server.
Mar 24 2017 01:29:52+08:00 BJ-OA-57-01 %%01HWCM/5/TRAPLOG(s)[7396]:OID 1.3.6.1.4.1.2011.6.10.2.1 configure changed. (EventIndex=30, CommandSource=4, ConfigSource=2, ConfigDestination=4)
Mar 24 2017 01:30:02+08:00 BJ-OA-57-01 %%01CFM/4/CFM_TRANS_FILE(s)[7397]:The configuration file was transferred through TFTP. (UserName=, OperateType=Put, SrcFile=flash:/2017-03-24.01-29-52.bj-oa-57-01.zip, DstFile=2017-03-24.01-29-52.b

Apr  2 2017 00:31:55+08:00 BJ-OA-57-01 %%01SHELL/6/DISPLAY_CMDRECORD(s)[7864]:Recorded display command information. (Task=VT0, Ip=, VpnName=, User=xaadm05, AuthenticationMethod="Tacacs", Command="display current-configuration")
Apr  2 2017 00:32:19+08:00 BJ-OA-57-01 %%01SHELL/6/DISPLAY_CMDRECORD(s)[7865]:Recorded display command information. (Task=VT0, Ip=, VpnName=, User=xaadm05, AuthenticationMethod="Tacacs", Command="display current-configuration")
Apr  2 2017 00:34:02+08:00 BJ-OA-57-01 %%01CFM/5/SAVE_FILE_RECORD(s)[7866]:The system automatically saved the current configuration to the file. (FileName=flash:/vrpcfg.zip)

 

解决方案

答复: 此命令set save-configuration interval 43200是在设备没有配置变更的时候默认1个月保存,如果配置有变更,默认5分钟自动保存一次.

END