Testing the Received Optical Power
Testing the Transmitted Optical Power
Querying and Clearing the Switching Status
Querying the Board Information Report
Querying the Board Manufacturer Information Report
Querying the Operation Log of the NMS
Setting the Working Mode of the SCB Board
Checking the Optical Fiber Connector
Cleaning the Optical Fiber Connector
Powering On and Powering Off the Equipment
Setting the AIS Insertion Switch
Setting the Threshold for the RMON Threshold Crossing Event
Setting the Threshold for the SDH Performance Event
Setting the Threshold for the Bit Error Alarm
Querying the Working Temperature of a Board